Nice Kit Toona - Gate Opener

Kit Contents

1 x Toona Ram Operator
2 x Wired Safety Photocells
1 x Electronic Control Unit (with receiver)
2 x Remote ON2e Keyfob Controllers
1 x Override Keys (for power cuts)
2 x Weldable Brackets with fixings & fittings
1 x Instruction Sheet

Purchase options for Nice Kit Toona - Gate Opener

Product Details Price Buy

Nice Solemyo Kit
Nice Solemyo Kit. Includes 1x 24v Photovoltaic solar panel (SYP), 1x 24v Battery box with control circuit (PSY24), 1x Power supply unit for charging the battery from mains supply (SYA1). £570.00 Add to cart

Nice Solemyo Battery
Easy to carry with its handles, the battery box keeps the electrical energy produced by the solar panel in the distributing of a continuous and ongoing process throughout the day. £234.66 Add to cart

Nice O-View Unit
Nice O-View unit for control, programming and diagnostics of devices equipped with BUS T4 connection. The O-View is essential if using a Nice solar powered kit. It will put the system into a standby mode when not in use to save power. £160.81 Add to cart


3 year warranty on this gate kit

This kit has 2 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 2 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.

Looking for the double gate Kit Toona, then view our range of double swing gate openers.

The Kit Toona is ideal for inward opening swing gates with leaves up to 7m an electromechanical gear motor, surface mounted. Ideal for residential and industrial use.

New third generation models: quality and durability thanks to the housing, made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents.

Internal moving parts completely in steel, light alloys and technopolymers.

Reliable and silent: patented layout of internal parts and lead nut in bronze.

Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.

Simple installation and maintenance, with built-in capacitor.

The 24 Vdc version has some additional features over the 230vac version that are worth consideration, it comes with magnetic encoder and new control unit (Moonclever MC824H) equipped with BlueBUS technology.

  • Easy programming by pushing a single button
  • Clutch with anti-crush safety feature
  • Automatic memorization of limit switches in opening and closing with self learning function
  • The system will operate during a blackout by means of rechargeable batteries.

Perfect for residential or light intensive use :

• simple programming, by means of a single key;
• self-learning of opening and closing limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means of optional rechargeable batteries (PS324);
• provision for connection of latest generation resistive sensitive edges.


24v Kit Toona's are fully compatible with our solar panel Nice Solemyo Kit


If you are purchasing the ToonaKit 7 or 8, you will receive the MC824H control unit and the MOFB outdoor photocells.

The brackets that come with the Kit Toona (PLA6 & PLA8) are for spot welding only, where the brackets listed as accessories (PLA14 & PLA15) are for wooden posts and gates.

Nice Automation Toona Kit

1 - Toona linear RAM
2 - Electric Safety Photocells
3 - Remote keyfob
4 - Control Unit
5 - Keyswitch


Nice Automation Toona Technical

The above diagram shows the max gate length and the max gate weight, these values are dependent upon each other, please check the length of your gate against the chart to see the max gate weight.

With all linear automation (straight arm motor) the laws of geometry do apply. These are a series of measurements that aid the motors to pivot on its triangular mounting bracket. If the measurements are not achieved, the motor will not pivot on its bracket and the gate will fail to achieve its full opening angle.

Below, the picture is of a birds-eye view of a typical gate leaf mounting:

The Kit Toona operator and bracket are positioned so as dimensions A & B comply to the installation instructions supplied with the kit.

The values are dependent on the Kit Toona model selected and dimension D.

Plan diagram of kit toona

Toona 5 Detail

Kit Toona 7 Details

Installation Hint:

When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.

This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.

For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.

Kit Toona optional upgrades and accessories include:

    * underground exit loop (detects the presence of a vehicle and automatically opens the gate)
    * extra photocells
    * additional key fobs
    * intercom kit
    * extended range (external) aerial

View gallery images of this item in typical Nice Kit Toona - Gate Opener gate automation installations.

Got a question about this item?
comments powered by Disqus