- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Nice MetroKit Double Underground Gate Kit
|2 x||Irreversible electromechanical gear motors
|2 x||Externally chamfered foundation boxes with mechanical stops on opening|
|1 x||Pair of surface-mounted wired photocells|
|1 x||Control unit|
|1 x||OXI Receiver of up to 4 channels, with connector, without built-in transmitter|
|2 x||ON2e transmitters 433.92 MHz, 2 channels|
|1 x||MEA3 Lever-type unlock system (for power cuts)|
|1 x||Instruction Sheet|
Purchase options for Nice MetroKit Double Underground Gate Kit
This kit has 2 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 2 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
An underground motor from Nice Automation available in either a 24v format or a 230v format.
The Kit Metro, ideal for swing gates with leafs up to 3.5 m, underground installation, ultra compact.
A more evolved range: For optimization of durability and performance: new boxes in cataphoresis finish (MECF), highly resistant to corrosion, both with mechanical stop on opening.
Cataphoresis is a surface treatment coating that can give high resistant to corrosion at the steel products and is characterized by an additional coating of a uniform epoxy or acrylic resin on the surface of the item, ensuring long outstanding protection against weather attacks, also allowing better adhesion of paint finish. The acrylic resin is different from the epoxy because it can remain in direct contact with bad weather conditions while maintaining the technical characteristics.
This treatment ensures a durable rust protection.
Reliable and resistant: motors made up of solid internal parts in metal and bronze alloy. New IP67 waterproof die cast aluminium.
Total freedom of choice: release from inside and outside, two key-operated models or freely compatible lever version and easily activated with just one hand.
The 230v and 24v versions of the Metro Kit come with either a Stainless Steel (MECX) foundation box or a Cataphoresis Finish (MECF) foundation box.
** Simple to use: mechanical stop system on closure. Standard opening max. 110°, optional opening 360° adapter kit can be purchased as an additional accessory.
The MetroKit is fully compatible with our solar panel Nice Solemyo Kit
The MetroKit 2 comes with the MC824H Control Unit.
1 - Underground motor ( Kit X-Metro shown )
2 - Electric Safety Photocells
3 - Remote keyfob
4 - Control Unit
5 - Keyswitch
|Max leaf gate up to||3.5 m|
|Type of Motor||Underground installation|
|Solar Power Option||No|
|Work Cycle (cycles/hour)||30|
Perfect for residential or light intensive use :
• simple programming, by means of a single key;
• self-learning of opening and closing limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• provision for connection of latest generation resistive sensitive edges.
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and / or cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.
Remember if fitting underground drivers to wooden gates, it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push-pull from the high torque will eventually split the wood.
For gates wider than 3m we also suggest using an electro-lock to ensure that there is not play in the gates when closed.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Optional upgrades and accessories include:
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
|Got a question about this item?|