- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Nice Wingo Motor Only - 3.5 Metre Swing Gate Opener
|1||x||Wingo Motor Only|
Purchase options for Nice Wingo Motor Only - 3.5 Metre Swing Gate Opener
Optional additional accessories for Nice Wingo Motor Only - 3.5 Metre Swing Gate Opener
|Nice Wingo Release Key||Release Key for use in the event of a power failure. A key is already included with each motor in the kit.||£1.36|
|Nice Release Key Cover for Wingo 3524||Nice Release Key Cover for Wingo 3524||£17.51|
This motor has 2 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 2 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The Kit Wingo is ideal for inward opening swing gates with leaves up to 3.5m. An electromechanical gear motor, surface mounted. Ideal for residential and industrial use.
New third generation models: quality and durability thanks to the housing, made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents.
Internal moving parts completely in steel, light alloys and technopolymers.
Reliable and silent: patented layout of internal parts and lead nut in bronze.
Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.
Simple installation and maintenance, with built-in capacitor.
Sophisticated electronics: slowdown, obstacle detection system, can be linked to the 8,2 KOhm resistive sensitive edge.
No blackout: continues to work even during power failures using optional (PS124) batteries that fit inside the control unit.
Perfect for residential or light intensive use :
• simple programming, by means of a single key;
• self-learning of opening and closing limit positions;
• automatic fault diagnostics;
• programming of pause time;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means of optional rechargeable batteries (PS124);
• provision for connection of latest generation resistive sensitive edges.
The above diagram shows the max gate length and the max gate weight, these values are dependent upon each other, please check the length of your gate against the chart to see the max gate weight.
With all linear automation (straight arm motor) the laws of geometry do apply. These are a series of measurements that aid the motors to pivot on its triangular mounting bracket. If the measurements are not achieved, the motor will not pivot on its bracket and the gate will fail to achieve its full opening angle.
Below, the picture is of a birds-eye view of a typical gate leaf mounting:
The Kit Wingo operator and bracket are positioned so as dimensions A & B comply to the installation instructions supplied with the kit.
The values are dependent on the Kit Wingo model selected and dimension D.
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Kit Wingo optional upgrades and accessories include:
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
|Got a question about this item?|