Call us on: 01202 717191

CAME FrogAE - Underground Double Swing Gate Kit

Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
CAME FrogAE-P Kit
230v
400 kg
110°
3.5m
Underground
£1,156.97+vat

£1,388.36 inc.vat
CAME FrogAE-P24
24v
400 kg
110°
3.5m
Underground
£1,319.27+vat

£1,583.12 inc.vat

Kit Contents

2 x Motor
2 x Foundation Box
1 x Frequency Card
2 x Wired Safety Photocells
1 x Control Board
2 x Radio Remote
1 x Antenna
2 x Release Mechanism
1 x Instruction Manual
1 x RGSM Connectivity Kit

Products bought with CAME FrogAE - Underground Double Swing Gate Kit

 

The CAME FROGAE-P underground gate kit is an invisible solution to power your gates.

This is a highly efficient operator that defies time thanks to the materials used in the foundation case and the gearmotor. A smooth, safe movement guaranteed in all working conditions.

The FROG motor is available in either 230v or 24v.

Both options have irreversible gear motors designed for swing gates up to 3.5m per leaf with built in adjustable opening and closing stops. 

The CAME FROGAE-P main features include:

  • Gate leaf opening angle up to 180 degrees (with 001FL-180).
  • Encoder technology tested in compliance with regulatory standards.
  • The 24v version can function in emergency mode during power outages.
  • Special corrosion resistant all-steel foundation box.
  • IP67 protection standards keeps the motor water tight.
  • Built-in adjustable mechanical stops.
  • Compatible with any access control inputs including: radio transmitters, card readers, telephone entry or safety device loops or photocells.

  • Obstacle detection functionalality allowing for total stop or inversion of movement when coming into contact wuth any obstacles.
  • FROGAE-P comes with the ZM3E control panel.
  • FROGAE-P24 comes with the ZL19N control panel.
Product Details

FROGAE-P

FROGAE-P24

Opening time 18 seconds 18 seconds
Frequency of use Domestic

Domestic or

Commercial

IP rate 67 67
Limited warranty (motor) 3 years 3 years

 

Need more information or advice on this kit ? Call our sales support team on 01202 717 191.

 

Kit Contents

2 x Motor
2 x Foundation Box
1 x Frequency Card
2 x Wired Safety Photocells
1 x Control Board
2 x Radio Remote
1 x Antenna
2 x Release Mechanism
1 x Instruction Manual
1 x RGSM Connectivity Kit
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.