- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- Mhouse Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Came FrogAE-S Single Underground Gate Kit
|1||x||Frog-CF Foundation Case|
|2||x||DIR-10 Wired Safety Photocells|
|2||x||TOP-432NA Radio Remote (433,92MHz)|
|1||x||AF43S Frequency Card (433,92MHz)|
Purchase options for Came FrogAE-S Single Underground Gate Kit
Optional additional accessories for Came FrogAE-S Single Underground Gate Kit
Emergency Stop Button - Twist Release
|This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely.||£8.08|
2.0m - 25mm gate safety edge
|2.0m Length of 25mm profile gate safety edge.
All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.
Profile & length options:- Safety Edges Options
Safety edge guide:- Download
Came DIR-10 Wired Safety Photocells
|Came DIR-10 Wired Safety Photocells. Improve the level of safety & protection on your gate system by adding an additional set of safety photocells.||£36.90|
Came TOP-432EV Remote
|Came TOP-432EV Gate Remote, 433 MHz, 2 Button/Channels. Gate system can support up to 99 remotes.||£27.00|
Came S7001 Keypad with One-Channel Card
|Came S7001 Keypad with one-channel card.||£89.51|
TPSL03 Outdoor Single Gang Bell Push
|Timeguard powerseal IP54 gate bell button push switch. Allows users to get in or out of the gate without a key fob.||£11.58|
Battery Card - LB180
|This card is to use with Came 24v motors for connecting two 12 V - 1.2 Ah emergency batteries. It will allow you to use the BAT2PK batteries for a power failure backup.||£80.40|
Set of two 12V - 1.2 Ah Batteries
|The BAT2PK batteries are a pair of 12v, 1.2 Ah maintenance free batteries to be used with the V0670, LBD2, LB22, LB90, LB54 and LB180 battery backup circuit boards and can be housed either in the gate controllers enclosure or in the 119 RIR 315 enclosure. For use with Came 24v motors.||£60.00|
Electric Lock With Single Cylinder
|LOCK81 Electric Lock With Single Cylinder. It removes the possibility of damage to a long flexible gate, or the stress and strains caused by pounding winds on closed boarded or similar types of "closed-in" gates.||£112.80|
Came DBC01 Wireless Photocell Upgrade
|Upgrade to wireless photocells with the above Came kits. Allows the wired photocells in the kit to be replaced with wireless. (Only available in combination to Came single gate kit).||£70.50|
FL-180 Adapter Kit
|Chain driven transmission lever to open gates up 180°. Can only work with a max gate width of 2m.||£126.36|
EMIS120 GSM/Wifi Switch
|Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels)||£159.00|
This kit has 2 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 2 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The hide-away solution to apply to gates in residential and apartment block settings
- The underground solution for gate automation.
- High-grade of protection from enviromental agents (IP67).
- The system automatically locks back after gate is manually released.
- Can open as wide as 180 degrees (with 001FL-180).
- 001FROG-AE and 001FROG-A24E featuring encoder-based technology, tested according to current legislative standards.
- The 24 V version can function in emergency mode during power cuts.
- Special corrosion resistant all-steel foundation box.
- Built-in adjustable mechanical stops.
The Came FrogAE-S comes with the ZM3E control panel.
The Came FrogAE-S24 comes with the ZL170N control panel.
All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and / or cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.
Remember if fitting underground drivers to wooden gates, it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push-pull from the high torque will eventually split the wood.
Weight and Width Guide
|Got a question about this item?|