- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- Mhouse Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Nice Kit Hyppo - Single Gate Opener Kit, Articulated
|1 x||Kit Hyppo motors|
|1 x||Folding arm & fixings|
|2 x||Wired Safety Photocells|
|1 x||Electronic Control Unit (with in-built 100m aerial)|
|2 x||Remote Keyfob Controllers|
|1 x||Override Key (for power cuts)|
|2 x||Brackets with fixings & fittings|
|1 x||Instruction Sheet|
Purchase options for Nice Kit Hyppo - Single Gate Opener Kit, Articulated
Optional additional accessories for Nice Kit Hyppo - Single Gate Opener Kit, Articulated
Emergency Stop Button - Twist Release
|This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely.||£8.08|
2.0m - 25mm gate safety edge
|2.0m Length of 25mm profile gate safety edge.
All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.
Profile & length options:- Safety Edges Options
Safety edge guide:- Download
Nice BF Wired Photocells
|Improve the level of safety & protection on your gate system by adding an additional set of safety photocells. Suitable for the HyppoKit 3 230Vac motor.||£51.72|
Nice MOFB Wired Photocells
|Improve the level of safety & protection on your gate system by adding an additional set of safety photocells. Suitable for HyppoKit 4 24Vac motor.||£47.26|
Nice 2 channel One2 remote
|2 channel ON2e key fob. The gate system can support at least 99 additional keyfobs.||£29.90|
Nice MoonTouch (MOTXR)
|12-key wireless keypad - suitable for the 230 V HyppoKit 3.||£68.34|
Nice MoonTouchBus (MOTB)
|12-key keypad - suitable for the 24 V HyppoKit 4.||£68.81|
Nice Hyppo 7000 (HYA12) Articulated Arm
|Nice Hyppo 7000 long articulated arm.||£116.40|
Nice KIO Key-Operated Selector Switch
|This key-operated selector switch which allows a quick release for disengaging the motor if you need to manually push the gates open. Included with 6m cable.||£57.53|
Nice (PLA11) 12 v Horizontal Electric Lock
|Horizontal 12 v electric lock (required for gates longer than 3 m, to keep the gate extra secure), to be mounted on the left hand leaf/side (ie leaf that opens second, inward opening gates only).||£129.13|
Nice PS324 24v Battery
|PS324 24v Battery with integrated battery charger. Ensures the gate still operates when power is cut.||£81.59|
Nice O-View Unit
|Reduced price only available when purchased with the compatible Nice kit above. Normal price £134.01. Nice O-View unit for controlling and programming your automation. Click for more information on Nice O-View Unit.||£120.60|
EMIS120 GSM/Wifi Switch
|Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels)||£159.00|
Nice Inti-2 Black - 2-Channel Remote
|Black INTI2 - Nice compact universal wireless remote (433.92 MHz), 150m Outdoor/30m Indoor range, 72bit rolling code||£25.00|
Nice Inti-2 Blue - 2-Channel Remote
|Blue INTI2B - Nice compact universal wireless remote (433.92 MHz), 150m Outdoor/30m Indoor range, 72bit rolling code||£25.00|
Nice Inti-2 Green - 2-Channel Remote
|Green INTI2G - Nice compact universal wireless remote (433.92 MHz), 150m Outdoor/30m Indoor range, 72bit rolling code||£25.00|
Nice Inti-2 Lilac - 2-Channel Remote
|Lilac INTI2L - Nice compact universal wireless remote (433.92 MHz), 150m Outdoor/30m Indoor range, 72bit rolling code||£25.00|
Nice Inti-2 Red - 2-Channel Remote
|Red INTI2R - Nice compact universal wireless remote (433.92 MHz), 150m Outdoor/30m Indoor range, 72bit rolling code||£25.00|
Nice Inti-2 Yellow - 2-Channel Remote
|Yellow INTI2Y - Nice compact universal wireless remote (433.92 MHz), 150m Outdoor/30m Indoor range, 72bit rolling code||£25.00|
This kit has 2 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 2 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The GateMotors Kit Hyppo articulated arm kits are quick and easy to install and ideal for DIY installation or gates installed between brick or stone pillars with leaves up to three metres each, especially where the GateMotors Kit Aster or Kit Diamond can’t be fitted.
It can be fitted to gates that open inwards without the need for special modification, the 24v kit also has in-built double limit-switches in both the opening & closing phase so physical gate stops are not required.
Opening angles of up-to 115° may be achieved dependent on gate hinge position. The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.
Easy installation, with adjustable accessories and brackets. Incorporated release key. Pivoted arm transmission adjustable and anti-shearing safety. The perfect integration of its components ensures the greatest quietness.
It is designed for intensive use by using a die-casting structure made of quality aluminium, stainless steel, bronze and steel. The fluid-grease lubrication system and the built-in thermal protection ensure a long-lasting working life in any weather conditions without the need for periodic maintenance.
If you are purchasing the HyppoKit 1 you will receive A60 control unit and the BF surface-mounted photocells.
If you are purchasing the HyppoKit 2 you will receive the MC824H control unit and the MOFB outdoor photocells.
The 24v Kit Hyppo is fully compatible with our solar panel Nice Solemyo Kit
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
How Do I tell if I need a left Hand kit or right hand kit?
Example shown is a Left Hand gate arrangement.
Left and and Right hand gates are denoted by the type of bracket. The way to tell which handed kit you need is by looking from the back of the gates from the inside of the driveway with the property to your back – if the gate is hinged on the left, it’s a left handed gate. If the gate is hinged to the right, it is a right handed gate.
Kit Hyppo optional upgrades and accessories include:
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.
|Got a question about this item?|